Operating Instructions; Design And Function; Main Parts; Signs And Stickers On The Machine - Atlas Copco LP 9-20 P Instrucciones De Seguridad Y De Funcionamiento

LP 9-20 P
OPErAtING
INStruCtIONS
to reduce the risk of serious injury or death
to yourself or others, before operating the
machine, read the Safety instructions section
found on the previous pages of this booklet.

Design and function

The Atlas Copco LP 9-20 P is a hydraulic power
pack designed for operating Atlas Copco hydraulic
breakers and other work tools. The power pack is
fitted with a 9 HP Honda GX 270 air cooled petrol
engine with hydraulic POD system (power on
demand). The oil flow of the LP 9-20 P power pack
is 20 l.p.m. (5 US gal/min).
Note! The torque of the engine is reduced
when reducing the rpm. The power pack
can therefore not in all cases deliver the
maximum pressure at low rpm.

Main parts

1. Filler cap, fuel
2. Filler cap, hydraulic oil
3. Sight glass, hydraulic oil level
4. Filter condition gauge
5. Hydraulic oil filter
6. Engine oil, dipstick
7. Ignition switch OFF and ON
8. Fuel tap
9. Oil cooler
10. Hydraulic pump
11. Choke control
© 2008 Atlas Copco Construction Tools AB
www.CrowderSupply.com • Toll Free: 888-883-5144
| |
No. 3392 5054 83 e 2008-06-30
Safety and operating instructions
12. Recoil start
13. Pressure relief valve
14. Foldable handles
15. By-pass valve
16. Air filter
17. Drain plug
Signs and stickers on the
machine
Signs and stickers with important information about
personal safety and machine care are mounted on
the machine. The signs and stickers must always
be legible. New signs and stickers can be ordered
from the spare parts list.

Data plate

The data plate contains the following important
information:
1. Maximum permitted hydraulic oil flow.
2. Machine type.
3. Maximum permitted hydraulic pressure.
4. The warning symbol together with the book
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
5. Serial number.
6. The CE symbol means that the machine
is CE-approved. See the CE declaration
which is delivered with the machine for more
information.
7. Year of manufacture.
Note! Certain machines in this range are not CE-
approved
9