Surround - Denon AVR-3802 Instrucciones De Operación

10

SURROUND

Before playing with the surround function
• Before playing with the surround function, be sure to use the test tones to adjust the playback level from the
different speakers. This adjustment can be performed with the system setup (see page 13) or from the remote
control unit, as described below.
• Adjusting with the remote control unit using the test tones is only possible in the "Auto" mode and only
effective in the DOLBY/DTS SURROUND modes. The adjusted levels for the different modes are automatically
stored in the memory.
1
Press the TEST TONE button.
TEST
TONE
(Remote control unit)
2
Test tones are output from
TUNING
the different speakers. Use
the channel volume adjust
BAND MODE
buttons to adjust so that the
TUNING
volume of the test tones is
the same for all the speakers.
(Remote control unit)
3
After completing
TEST
TONE
adjustment, press the TEST
TONE button again.
(Remote control unit)
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to
suit your tastes, as described below.
1
Select the speaker whose level you want to
adjust.
CH VOL
ENTER
SHIFT
(Main unit) (Remote control unit)
The channel switches as shown below each
time the button is pressed.
FL C FR SR SBR SBL
SW SL
FADER
2
Adjust the level of the selected speaker.
TUNING
SELECT
BAND MODE
TUNING
(Main unit) (Remote control unit)
When the surround back speaker setting is set
to "1spkr" for "Speaker Configuration", this is
set to "SB".
SETUP RETURN
TUNING A/B
2
MEMORY
BAND MODE
CHANNEL VOLUME
TUNING
+
+
SKIP
ENTER
-
-
SHIFT
SKIP
MUTING
TUNER PHONO CD
1 2 3
CDR/ TAPE VDP DVD
4 5 6
VCR-1 VCR-2 /V.AUX
TV/DBS
7 8 9
TV/ 0 +10
VCR
RDS PTY RT
1, 3
TEST
SPEAKER OUTPUT
TONE
the
B
SETUP RETURN
TUNING A/B
2
MEMORY
BAND MODE
CHANNEL VOLUME
TUNING
+
+
SKIP
ENTER
1
-
-
SHIFT
SKIP
MUTING
TUNER PHONO CD
NOTES:
• The adjustment range for the different channels
is +12 dB to –12 dB.
• When using the DIRECT mode, the sound from
the subwoofer can be cut by lowering the SW
(subwoofer) setting one step from –12 dB
(setting it to "OFF").
Fader function
• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels
(SL, SR, SBL and SBR) together. Use it for example to adjust the balance of the sound from the different
positions when playing multi-channel music sources.
1
Select "FADER".
CH VOL
(Main unit)
The channel switches in the order shown
below each time this button is pressed.
FL C FR
FADER SW
2
Press the D button to reduce the volume of the
front channels, the H button to reduce the
volume of the rear channels.
The fader function does not affect the SW
channel.
SELECT
(Main unit)
The channel whose channel level is adjusted
lowest can be faded to –12 dB using the fader
function.
If the channel levels are adjusted separately after
adjusting the fader, the fader adjustment values
are cleared, so adjust the fader again.
Dolby Surround Pro Logic
2 1
B
1
Select the Dolby Surround Pro Logic II mode.
• The Dolby Pro Logic indicator lights.
SURROUND SELECT
MODE
(Main unit) (Remote control unit)
2
Play a program source with the
• For operating instructions, refer to the manuals of the
respective components.
B
ENTER
SHIFT
(Remote control unit)
SR SBR SBL
SL
2
1
TUNING
BAND MODE
TUNING
(Remote control unit)
This is only displayed when setting the fader control.
II mode
4, 5, 6
1 3, 5 1, 4, 6
Light Display
DOLBY/DTS
SURROUND
mark.
ENGLISH
2 1
SETUP RETURN
TUNING A/B
MEMORY
BAND MODE
CHANNEL VOLUME
TUNING
+
+
SKIP ENTER
-
-
SHIFT
SKIP
MUTING
TUNER PHONO CD
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD
DISPLAY MENU
3
SURR.
OSD
PARA.
SETUP RETURN
TUNING A/B
MEMORY
BAND MODE
CHANNEL VOLUME
TUNING
+
+
SKIP ENTER
-
-
SHIFT
SKIP
MUTING
TUNER PHONO CD
1 2 3
CDR/ TAPE VDP DVD
4 5 6
VCR-1 VCR-2 /V.AUX
TV/DBS
7 8 9
TV/ 0
+10
VCR
RDS PTY RT
TEST
SPEAKER OUTPUT
TONE
SURROUND
1
DOLBY/DTS DSP 5CH / 7CH
SURROUND SIMU. STEREO
6.1 / 7.1
DIRECT STEREO
SURROUND
INPUT
MODE ANALOG EXT.IN
SYSTEM CALL
27