Connection To Mains Supply; Power Terminals - salmson MULTI-HE Instalación Y Instrucciones De Puesta En Marcha

English

Connection to mains supply

Connect the 4 wires cable on the power terminals
(phases + earth).
Connection of inputs / outputs
• The sensor, external setpoint and [ext.off] inputs cable
must be necessarily screened.
• The remote control allows the switching On or Off of the
pump (free contact), this function has priority on the others.
• This remote control can be removed by shunting the ter-
minals (3 and 4).
Connection terminals of the interface
PLR
LON
32

Power terminals

L1 L2 L3
Inputs / outputs terminals
ext.off
aux MP
1 2 3 4 5 6
Not used Not used
Remote
control
ON/OFF
Example: Float switch, pressure gauge for dry-running...
The optional IF-Module PLR is to be pushed into the mul-
tiplug in the connection area of the converter.
The connection is twist-proof.
The optional IF-Module LON is to be pushed into the
multiplug in the connection area of the converter.
The connection is twist-proof.
20mA/10 DDS
7 8 9 10 11
SALMSON 08/2016