Application; Principles Of Operation; To The User; To The Fitter - Whale Watermaster Manual De Instrucciones

3. PRINCIPLES OF OPERATION

The Whale Watermaster is an automatic pressure pump designed for recreational vessels or vehicles. The pump integrates
high specification motors and fully protected wiring to ensure reliability and a smooth consistent flow during use. Please refer
to the specifications (section 1) for the model range.

4. TO THE USER

Please read the following carefully before installation.
WARNING: Please note that incorrect installation may invalidate the warranty.

5. TO THE FITTER

Check that the product is suitable for the intended application, follow these installation instructions and ensure all relevant
personnel read the points listed below. Also ensure that these operating instructions are passed on to the end user.

6. APPLICATION

The Whale® Watermaster ® Automatic Pressure Pump Range is designed for installation in recreational vessels or vehicles,
only for saltwater or freshwater use, with 12 V d.c. or 24 V d.c. electrical supply only. If it is intended for use for any other
purpose or with any other liquid, it is the user's responsibility to ensure that the pump is suitable for the intended use and, in
particular, that the materials are fully compatible with the liquids to be used.
7. WARNINGS
1. This pump is designed for supplying water in a boat, caravan or motorhome. If it is intended for use for any other
purpose it is the user's responsibility to ensure that the pump is suitable for the intended use.
2. Not suitable for pumping flammable liquids, diesel, chemicals etc. Only suitable for freshwater or salt water.
3. A Whale® strainer must be fitted on the inlet side of the pump to prevent any dirt/debris entering the
pump (included with retail pumps).
4. With all applications it is important that a system of safe working practice is applied to installation, use
and maintenance. Ensure the electric supply is turned off and water system is drained before
installation. In order to securely fasten the unit, ensure that the mounting surface is a minimum
thickness of 19mm (¾") when fitted.
5. NOTE: In a marine application, do not screw directly to the hull. Must be mounted on a bulkhead or additional board.
6. CAUTION: Pump not intended for continuous use. Maximum duty cycle < 33%
WARNING: Fire hazard. Wiring must comply with applicable electrical standards and include a properly sized fuse or
7.
circuit breaker. Improper wiring can cause a fire resulting in injury or death. Switch off the power while making
connections. Suggested wiring information is given as guidance only. For full information, refer to the USCG, ABYC
and ISO regulations for marine applications and wiring gauges, connectors and fuse protection.

8. PARTS LIST

Qty 1 Whale® Watermaster® Automatic Pressure Pump
Qty 1 Whale® Strainer (Retail only)
Qty 2 WX1584B - 1/2" Barbed Connectors (Retail only)

9. OPTIONAL EXTRAS

AK1316 Marine Replacement Head Kit
AK1318 RV Replacement Head Kit
AK1317 Microswitch Kit

10. INSTALLATION

NOTE - Always disconnect power sources before installing. Incorrect installation will invalidate warranty.
Elite
Twist
Faucet
Deck
Shower
Quick
Quick Connect
Connect
Equal Tee
Elbow
Water Tank
Elegance
Combination
Swan Neck
Mixer
Faucet
Shut
off
valve
Thermostatic
Stem Shut
Mixer
off Valve
Non Return
Valve
Accumulator
(optional)
Qty 1 Screw Kit (Retail only)
Qty 2 WX1587B - 1/2" Threaded Connectors (Retail only)
WF1230 Whale Aquasource Clear Water Filter 12mm
WF1530 Whale Aquasource Clear Water Filter 15mm
The Whale® Watermaster® Automatic Pressure
Pump is designed for use in the following
applications:
Expansion
Vessel
Leisure marine vessels (fig 1a)
RV/Caravan vehicles (fig 1b)
Fig. 1a Typical Installation in a
Marine System
(Illustration for guidance purposes only)
3