AERMEC FCL 32 Manual De Instalación página 29

• Installation in proximity of a wall
If installed in proximity of a wall it is
• Electric box maintenance
If the electric box must be accessed for
maintenance, follow the indications
below:
- Open the filter grid (turn the two ratchets
1
28
IFCLIJ 1805 - 4528500_09
possible to close the corresponding flow
inlet using the gasket supplied.
by ¼ of a turn).
- Remove the lock screw on the corner
door with the Aermec logo.
- Remove the 2 lock screws from the elec-
tric box.
• Disassembly for maintenance
- Before performing any operation on the
unit, the electric power supply must be
interrupted.
- To access the inside of the unit, remove
the two cross-members fixed to the
frame with the screws. It is now possible
to remove the fan protection grid and the
polystyrene basin. (see figure)
- DANGER!! Before re-applying voltage
to the unit, all components, especially
the protection grid, must have been
re-mounted correctly.
- Slide the electric box downwards.
- Carry out the necessary maintenance.
- Re-mount everything performing the
disassembly procedure in reverse order.
2 3