Preparing The Place Of Installation; Assembly Diagram; Safety Precautions - Palazzetti ECOPALEX Glass Manual De Instalación, Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

5
PREPARING THE PLACE OF
INSTALLATION
5.1

ASSEMBLY DIAGRAM

A) For proper installation, the smoke ducting between
B)
C) Uni standards require installaiton of a heeat recovery
grille as close as possible to the ceiling.
D)
E)
aluminium foil
F)
G) Minimum distance 1 cm between cladding and
The attached product booklet indicates the minimum
distances, expressed in cm, which must be respected
and objects.
5.2

SAFETY PRECAUTIONS

The responsibility for any work done in the space where
The user is also entrusted with carrying out the checks
regarding the proposed installation solutions.
Any wood beam of the cladding, or any finish in
The user must comply with all the local, national and
European rules and regulations.
If the floor does not have a sufficient load-bearing
capacity, it is advisable to use a load-distributing plate
of an
appropriate size.
The appliance must be installed on a floor with an
adequate carrying capacity.
If the floor does not have a sufficient load-bearing
capacity, it is advisable to use a load-distributing plate
of an
appropriate size.
be carried out by skilled technicians only.
It is always advisable for the user to call our assistance
If other technicians are called in, please make sure they
Before starting the assembly or dismantling phases of
precautions as established by law, and in particular :
1.
he must not work in adverse conditions;
2.
he must be in perfect psychophysical condition to
work and ensure that the individual and personal
accident prevention devices are sound and in perfect
working order;
3.
he must wear accident prevention gloves;
4.
he must wear safety shoes;
5.
he must make sure that the area he is working in for
obstacles.
B
26
C
A
E
D
F
G
H
- 5.1 -

Publicidad

Tabla de contenido
loading

Tabla de contenido