6
COMMISSIONING AND USING
6.1
OPENING THE DOOR
To open the door, you must use the supplied tool.
risking to damage the glass and turn it upwards to open
and downwards to close.
The door must be opened gradually to allow smoke in the
from escaping into the environment. When starting the
temperature, it is recommended to have it operate a few
minutes with the door drawn near the stop, but not closed,
to allow condensation formed on the glass to evaporate.
6.2
LIGHTING THE FIREPLACE FOR THE FIRST
TIME
1.
should burn at a moderate rate for approximately an
materials of the metallic parts.
2.
wood provided they are dry.
3.
and escape due to the complete drying of the paints.
FLUE DRAUGHT
OVERLOADS OF WOOD: cause excessive stress that
can deform the internal cast iron parts.
Never use alcohol, petrol, kerosene or other liquid fuels
lighters as they can seriously damage the hearth's walls.
The attached product booklet indicates the minimum
distances, expressed in cm, which must be respected
and objects.
34
- 6.1 -