Automatic Tv Channel Search - Philips DVDR 615/17 Manual Del Usurio

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Automatic TV channel search

During installation, all available TV channels are searched for and saved. If the channel
assignments of your cable or satellite TV provider change or if you are reinstalling the DVD
recorder, e.g. after moving, you can start this procedure again. This will replace the TV channels
already saved with the new ones.
1
Turn on your TV. Select the channel number for the DVD
Recorder (channel 3 or 4 or the Audio/Video In channel).
2
Turn on the DVD Recorder by pressing STANDBY-ON m .
3
Press SYSTEM-MENU on the remote control. The menu bar
will appear at the top of the TV screen.
4
' using D or C .
Select '
A
5
Press CH- B continuously to select the line 'Installation'. (It is
on the second screen of menus.) Confirm with C .
6
Select line 'Auto Ch. Programming' using
CH+ A .
7
Press C . The automatic TV channel search starts. This allows
the DVD Recorder to save all available TV channels. This
procedure may take several minutes.
8
When the channel search is completed, 'Auto ch. search
complete' will appear on the TV screen.
9
Press SYSTEM-MENU repeatedly to remove all the menus
from the screen.
a Very few TV channels were found
b During 'Automatic channel search' the DVD Recorder detects
whether an antenna or a cable TV signal is connected. If you have
connected a cable TV signal but found very few TV channels, you
must search the channels manually.
To do so, select 'Cable/Antenna' instead of line 'Auto Ch.
1
Programming' in step 6 and confirm with C .
If you select 'Cable', channels 1-125 will be available.
2
If you select 'Anten.', channels 2-69 will be available.
Select your type of connection by pressing C repeatedly:
'Anten.', 'Cable' or 'Auto.' automatically detects which one you
have.
Confirm the setting with OK .
3
Press SYSTEM-MENU to go to the next menu. Press OK to
4
start channel search as prompted by the on-screen message. When
the channel search is complete, press SYSTEM-MENU repeatedly
to remove all the menus.
You can read about how to search for a TV channel manually in the following section 'Adding
and clearing TV channels manually'.
24
CH- B or
Problem
Installation
Auto Ch. Programming
Searching for TV channels
000 Channels found
h______________
Please wait
Installing your DVD recorder

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido