MSA SingleLine SCOUT Manual De Instrucciones página 10

Use
Alarm Statuses
Alarm
1st threshold
2nd threshold
≤ 60 bar
Battery warning
Manual alarm
Motion pre-alarm
Motion alarm
The user can acknowledge an alarm after it is triggered.
Alarm
1st threshold
2nd threshold
≤ 60 bar
Battery warning
Manual alarm
Motion pre-alarm
Motion alarm
GB
Cylinder Pressure Display
The cylinder pressure is displayed via the integrated analogue gauge and additionally detected from
an internal pressure sensor. Current pressure can be read from the gauge using the imprinted scale.
The up-to-date filling level of the compressed air cylinders is displayed in 3 stages, in accordance with
the following coding, using 3 LEDs on each side of the gauge when the device is lifted from the user's
chest.
Following thresholds represent the standard setting and can be changed using MSA A2 Software in
combination with 10181672 as PC interface.
See MSA A2 Software for more details.
10
LEDs
Gauge green lighted and blinking
Gauge yellow lighted and blinking
Gauge red & buddy lights lighted
and blinking
Bottom red
Gauge red & buddy lights lighted
and blinking
Gauge red & buddy lights lighted
and blinking
Gauge red & buddy lights lighted
and blinking
Acknowledge
Not necessary, since short acoustic signal.
Not necessary, since short acoustic signal.
Confirmation only possible below 15 bar pressure: Push the alarm
button twice.
Pneumatic whistle cannot be confirmed.
Alarm will continuously appear.
Exchange batteries – outside of hazardous area only
Replacing the battery after the operation.
Push the alarm button twice.
Movement of SingleLine SCOUT
Push the alarm button twice.
SingleLine SCOUT
Acoustic
1 Beep
2 Beep
2 Beep
None
Distinct pattern
Increasingly louder consecutive
variable tones
Distinct pattern