Initial Settings
When applying a power on for the first time, it is necessary to initialize the remote controller for Air-to-Water unit.
Please refer to the installation instructions or consult the contractor.
1 Display the menu screen.
To return to the previous screen
.
Press
To return to the top screen
Press
2 times.
2 Select [Initial settings].
→
3 Select the item to set.
→
Clock
4 Set the date and time.
→
(Repeat)
Clock type
4 Select the type to display.
→
Operation lock
4 Select the type of lock and set to
[
].
→
To cancel lock
Select [-] in step 4.
Only for [Lock all keys]
Select [YES].
→
→
→
(Press 2 times
to finish.)
→
(Press 2 times to finish.)
→
(Press 2 times
to finish.)
Clock
Clock type
20:30 (THU)
Menu
20:30 (THU)
1. Basic instructions
2. FLAP
3. Lock indiv. flap
4. ON/OFF timer
[
]
START
Sel.
Page [
] Confirm
Menu
20:30 (THU)
8. Quiet operation
9.
Power consumption monitor
10.
Energy saving
11. Initial settings
Sel.
Page [
] Confirm
Initial settings
20:30 (THU)
1. Clock
2. Clock type
3. Controller name
4. Operation lock
Sel.
Page [
] Confirm
Clock
20:30 (THU)
Year/Month/Day
Hour : Min
2013
/
5
/
16
20 : 30
Change
Month
Clock type
8:30PM (THU)
AM/PM
Change
[
] Confirm
Operation lock
20:30 (THU)
Lock all keys
Lock START/STOP
Lock MODE
Lock SET TEMP.
Sel.
/
Operation lock
20:30 (THU)
Lock all keys?
Lock all keys
Lock START/STOP
Hold [ ] for 4 s. to unlock
Lock MODE
Lock SET TEMP.
YES
NO
Sel.
/
Operation lock
* The Air-to-Water function is not
applicable to the feature list No.2,
No.3, No.6, No.7, No.10, No.11 and
No.12 at the Menu screen (in TANK
mode and Air-Conditioning mode).
2. FLAP
3. Lock indiv. flap
6. Filter info
7. Outing function
10. Energy saving
11. Initial settings
Operation lock
Lock MODE
(only TANK mode)
Lock FAN SPEED
Lock FLAP
Temp sensor
Main/sub
Vent output
12. Ventilation
Menu
20:30 (THU)
8. Quiet operation
This function is disabled.
9.
Power consumption monitor
10. Energy saving
11. Initial settings
[ ] Close
Sel.
Page [
] Confirm
AM/PM
24 h
E
NGLISH
7