Operation
TANK mode
1 Start Operation
Press
(The operation indicator illuminates.)
2 Change the temperature setting
Press
(In TANK mode, only "SET TEMP." can be changed. : 35°C to 65°C)
(The cursor disappears.)
Air-Conditioning mode
[Heating Curve Function] (Only heating mode)
Supply water temperature is adjusted automatically, according to outdoor temperature.
Supply water temperature is able to adjust manually by changing offset value.
1 Start Operation
Press
(The operation indicator illuminates.)
2 Change the setting
Press
Set temperature
z
Press
(When the cursor is not visible.)
Heat (With use of Heating Curve) : -5°C to +5°C (offset)
[Normal mode] With no use of Heating Curve Function.
Supply water temperature can be set.
1 Start Operation
Press
(The operation indicator illuminates.)
2 Select the item to set
Press
3 Change the setting
Press
8
Water Temperature
To change the setting
To stop
(The operation indicator turns off)
Under Heating Curve Control
To change the setting
To stop
(The operation indicator turns off)
AIR-CONDITIONING
MODE
SET TEMP.
COOL
AIR-CONDITIONING
MODE
SET TEMP.
AIR-CONDITIONING
COOL
SET TEMP.
MODE
HEAT
AIR-CONDITIONING
For cooling, see the note [Normal mode] below.
SET TEMP.
MODE
HEAT
Water Temperature
To change the setting
To stop
(The operation indicator turns off)
HOT-WATER-SUPPLY
20:30 (THU)
7
SET TEMP.
TANK
℃
Operation indicator
AIR-CONDITIONING
20:30 (THU)
MODE
SET TEMP.
Case: With use of Heating Curve Function.
HEAT
℃
AIR-CONDITIONING
20:30 (THU)
MODE
SET TEMP.
HEAT
℃
20:30 (THU)
7
Operation indicator
℃
20:30 (THU)
7
20:30 (THU)
7
℃
℃
20:30 (THU)
7
℃
Case: With no use of Heating Curve Function.
AIR-CONDITIONING
SET TEMP.
MODE
HEAT
℃
Operation indicator
7
7
20:30 (THU)
7