NOCCHI SENSORMAT Manual De Uso página 27

YES means that the unit may send and receive data through a serial port
CURRENTLY NOT AVAILABLE
- Line n. 2 no message
At the end of the configuration and of the insertion of the operational parameters, the unit remains predisposed for
manual operation. By pressing key (11)
with manual operation) and the green led is lit (6)
After selecting the parameter press key (18)
NOCCHI PUMPS
BAR 5.3
The unit is working in Automatic operation and if the unit is equipped with electronic transducer, the network pressure
level is displayed on the 2
2) UNITS WITH PRESSURE TRANSDUCER
The following message will be displayed:
NOCCHI PUMPS
BAR 5.3
In this case both the green led (2)
BEFORE THE BUZZER EMITS THE 8
M
Press key (11)
A
The following message will be displayed:
MANUAL FUNCTION
BAR 5.3
The buzzer automatically sounds off and the red led (5)
By pressing key (18)
ENTER
REVERSAL OF POSITION
WITH SENSOR NO
- Line n. 1 REVERSAL OF POSITION
+
With keys (16)
YES means that at the end of every operational cycle the pump which was initialised first will be changed
NO means that the reversal of the pumps position will remain locked
After choosing the parameter press key (18)
- Line n. 2 WITH SENSOR
+
With keys (16)
YES means that the unit is equipped with electronic pressure sensor
NO means that the unit works with differential pressure switch
M
for a few seconds, the red automatically switches off (5)
A
ENTER
nd line.
LINEA
and the red led (5)
th
(EIGHTH) RING
for a few seconds
for 10 seconds, the following message will be displayed:
-
or (17) it is possible to set YES or NO.
ENTER
-
or (17) it is possible to set YES or NO.
AUT
(LED with automatic operation)
the following message will be displayed:
MAN
are lit
MAN
remains turned on.
GB
MAN
(LED
25