DOTLUX CIRCLEflat 5096-030120 Instrucciones De Uso página 5

EN
ITEM-NR.
DIMENSIONS
POWER CONSUMPTION
COLOR TEMPERATURE
BEAM ANGLE
INPUT VOLTAGE
WORKING TEMPERATURE
POWER FACTOR
COLOR RANDERING INDEX
INSTALLATION OPENING
ITEM-NR.
DIMENSIONS
POWER CONSUMPTION
COLOR TEMPERATURE
BEAM ANGLE
INPUT VOLTAGE
WORKING TEMPERATURE
POWER FACTOR
COLOR RANDERING INDEX
INSTALLATION OPENING
Scope of delivery
- CIRCLEflat
- User manual
Intended use
Stationary luminaire for indoor use
Attention
The light source of this luminaire is not re-
placeable; when the light source reaches its
5096-030120 3022-130120
Ø 98 x 26 mm Ø 118 x 26 mm
4 W 6 W
3000 K 3000 K
120° 120°
220 – 240 V AC 220 – 240 V AC
-20 °C – +45 °C -20 °C – +45 °C
0,60 0,60
> 82 > 82
77 - 82 mm 95 - 100 mm
3023-130120 3024-130120
Ø 175 x 27 mm Ø 222 x 28 mm
15 W 20 W
3000 K 3000 K
120° 120°
220 – 240 V AC 220 – 240 V AC
-20 °C – +45 °C -20 °C – +45 °C
0,70 0,70
> 82 > 82
140 - 150 mm 190 - 200 mm
end of life, the whole luminaire shall be re-
placed.
Conformity
DOTLUX GmbH hereby declares that this
product complies with the EU Directives
EMC 2014/30/EU, LVD 2014/35/EU, RoHS
2011/65/EU and the Ecodesign Directive
2009/125/EC.
8
User manual
Before Using / Notice of Liability
Dear customer,
please unpack the products carefully and
check that the delivery is complete and that
the units are undamaged. Do not operate
lamps with a damaged electrical part, cable
or glass. In cases of damaged components,
you should contact the mentioned service
address (point 9) immediately. Please read
these instructions carefully. Thereby mista-
kes are avoided that could lead to hazards or
malfunction. Keep the instructions and the
installation manual in a safe place for future
reference. The manual must be passed on to
all subsequent owners or users of the pro-
duct. Ensure that any supplements you may
receive have also been appended to the ma-
nual. The manufacturer cannot accept any
responsibility and/or liability for bodily injury
or property damage due to:
- improper installaon
- unauthorized modification of the product
- improper use
- non-compliance with these instructions
Declaration of Conformity
The full text of the EU declaration of con-
formity is available at the following Internet
address:
https://www.dotlux.de/konformitaetserk-
laerungen/
Other Symbols
Always follow the symbols on the packaging
and in the instructions. The characters and
symbols are explained below:
This manual assumes knowledge
which corresponds to a complete
training as an electrician.
Attention! Basic safety precauti-
ons should always be followed.
Intended Use / Foreseeable Misuse
This product is for lighting. Please see the
assembly drawing for further information
concerning intended use. Do not expose to
strong mechanical stress or heavy conta-
mination. For safety reasons, do not modify
and/or convert the product as any other use
may damage the product. This could lead
to hazards such as short circuit, electrical
shock or fire.
Maintenance/ Care
Turn off the power and allow lamp
to cool down before cleaning,
maintaining or replacing the lamp!
Check that there is no voltage. Use a dry
or moist cloth for regular cleaning (2 or 3
times per year). Chemicals or abrasives
must never be used. A special stainless steel
cleaning agent is recommended for cleaning
stainless steel luminaires. The following en-
vironmental influences can have undesirable
effects on the surface of the product: acid
rain and soil, high salt content in the air, clea-
ning agents, fertiliser (especially in flower
beds), de-icing salt, other chemical substan-
ces (e.g. pesticides). Only the lamps stated
on the packaging may be used.
9