DENTAURUM amda Instrucciones De Uso página 19

Always use two pliers to make adjustments and bends. Do not bend
or adjust with your hands. Do not bend the posterior, straight part of
the amda palatal arch. Depending on the length of the palate and the
®
required distalization distance of the molars (plus a 5 mm buffer), the
amda palatal arch must be shortened. Once amda
®
into the patient´s mouth, you can accurately measure and shorten the
posterior part of the amda
Fig. 3: Location of the amda
5.1.3.2 Aligning the amda
Slide the amda
amda palatal arch. The larger telescope tube should face posterior.
®
Move the amda
elements of the amda
sheath of the molar bands (Fig. 4). Align the fixing screws of the
amda telescopes towards occlusal. Tighten the posterior screw so that
®
the amda telescope can no longer move on the amda
®
This screw remains tightened for now.
palatal arch.
®
palatal arch
®
telescopes
®
telescopes with the amda
®
telescopes on the amda
®
connectors are at the height of the palatal
®
has been fitted
®
connector onto the
®
palatal arch until the fixing
®
®
EN
palatal arch.
19