DENTAURUM amda Instrucciones De Uso página 25

5.4.2 Mesialization with amda
amda was designed for distalization. However, the appliance can also
®
be used for bi- or unilateral mesialization (Fig. 8). In addition, amda
be used to distalize one jaw side and mesialize the other side.
For mesialization, turn the amda
amda palatal arch again. The stop screw with the thinner telescope
®
tube is then on the posterior end. The right amda
replaced by the left connector and vice versa. Follow the same steps to
adapt, incorporate, monitor, and remove amda
mesialization, tighten the posterior stop screw after activating it and
loosen the anterior stop screw (now on the larger telescopic tube).
Fig. 8: Mesialization with amda
®
telescope 180° and place it on the
®
®
connector must be
®
as above. To activate
®
EN
can
®
25