Sinclair AIR COMFORT Manual De Instrucciones página 33

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 9
indicates the above operating modes in a cycle when the key is pressed without being
released. However, the transmission icon will not appear until the key is released and the
confirmed mode is transmitted.
4. Temperature adjusting key:
The setting temperature increases or decreases by 1℃ each press of the key. If you keep
pressing the key without release, the setting temperature increases or decreases
continuously.
5. Power key:
When this key is pressed, the previous setting (temperature, speed, direction of airflow, sleep)
which has been memorized in the remote control will be transmitted to the unit and then the
unit operates correspondingly. Press the key is again to turn off the unit..
6. Sleep key
When this key is pressed, the unit activates the sleep function and change to low fan speed.
(1) Press "SLEEP" key to set the sleep function and press again to cancel the previous
setting.
(2) Sleep function in the cooling mode: after setting, the temperature will increase 0.5℃
automatically every half an hour, and at most increase 2℃ after two hours. Then it keeps
the temperature without further changes.
Sleep function in the heating mode: after setting, the temperature will decrease 1℃
automatically every hour, and at most decrease 2℃ after two hours. Then it keeps the
temperature without further changes.
(3) When cutting power off, the sleep function setting will be cancelled automatically.
(4) When you turn off the unit, sleep function setting will be cancelled automatically.
7. Timer key:
TIMER-ON: Set the timer to turn on the unit automatically after the time counts down.
1. Press the "TIMER" key at stand-by mode to set the time you desired.
2. Once the setting time comes to an end, the unit will turn on automatically.
3. Press "POWER" key before time counts down, the unit turns on and cancels the timer.
TIMER-OFF: Set the timer to turn off the unit automatically after the time counts down.
1. Press the "TIMER" key while operating to set the time you desired.
2. Once the setting time comes to an end, the unit will turn off automatically.
3. Press "POWER" key before time counts down, the unit turns off and cancels the timer.
8. Auto key
Automatic fan speed
9. High key
High fan speed
10. Mid key
Middle fan speed
11. Low key
Low fan speed
31
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido