Publicidad
Idiomas disponibles
Idiomas disponibles
ISO DIN radio provision with pocket
1. Secure the radio brackets to the pocket
using the (4) supplied #8 x 3/8" Phillips
screws. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into the completed
assembly, then secure it using the screws
supplied with the radio. (Figure B)
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or AXXESS.
Test the radio for proper operation.
5. Slide the radio/bracket assembly into the
dash, then secure using the (2) #8 x 3/8"
Phillips screws provided.
6. Reassemble the dash in reverse order of
disassembly using the new radio trim panel.
Ensure to connect the panel with the harness
removed in step 5 from Dash Disassembly .
Note: The door lock button will not be
active in 2019 models.
6
KIT ASSEMBLY
(Figure A)
(Figure B)
1.800.221.0932
|
MetraOnline.com
Publicidad
