Kit Assembly - Metra 99-5829CH Instrucciones De Instalación

ISO DIN radio provisions with pocket
1. Attach the provided clips to the radio
trim panel. The factory clips may be
used if desired.
2. Attach the factory display to the radio
trim panel using the supplied (4)
#8 x 3/8" Phillips screws. (Figure A)
3. Mount the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips pan head screws supplied.
(Figure B)
4. Slide the aftermarket radio into radio
brackets and secure with the screws
supplied with the radio. (Figure B)
5. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
6. Mount the new radio assembly into
the dash, snap-in the radio trim panel,
and reassemble dash in reverse order
of disassembly.

Kit Assembly

(Figure A)
99-5829CH
4
(Figure B)