ISO DIN radio provision with pocket
(continued)
4. Slide the radio into the completed
assembly, and then secure it to
the assembly using the screws
supplied with the radio. (Figure C)
5. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS.Re-connect the negative
battery terminal and test the radio
for proper operation.
6. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure C)
99-9108B
ISO DDIN radio provision
1. Attach the radio brackets to the
radio trim panel using (4) #8 x 3/8"
Phillips screws supplied.
(Figure A)
2. Slide the radio into the completed
assembly, and then secure it to
the assembly using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
4. Reassemble the dash in reverse
order of disassembly.
3
(Figure A)
(Figure B)