Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Radio mounting brackets • D) Pocket • E) (4) White plastic panel clips
• F) (4) 5mm x 12mm Phillips Screws • G) (2) #8 x 3/8" Phillips Screws
A
B
Metra. The World's Best Kits.
®
Ram Promaster
Visit
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DIN radio provision with pocket
• Custom texture
C
MetraOnline.com
2014-Up
D
E
F
G
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
99-6523
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-1784 or AXVI-6524
Antenna Adapter: 40-VW10 or 40-EU10
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 86-5618 radio removal tool
• 86-3528 radio removal tool
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 8/5/20 INST99-6523

Publicidad

loading

Resumen de contenidos para Metra 99-6523

  • Página 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 8/5/20 INST99-6523...
  • Página 2: Dash Disassembly

    DASH DISASSEMBLY With radio delete or Single DIN factory radio: 1. Using Metra’s 86-5618 radio removal tools pull the factory radio from the dash. (Figure A) 2. Remove (2) Phillips screws in bottom of dash opening. 3. Unclip and remove the factory radio trim panel.
  • Página 3: Kit Assembly

    (Figure C) (Figure B) the dash. Metra recommends using (Figure D) the proper mating adapter from Metra or AXXESS. Test the unit for proper operation. 6. Slide the aftermarket radio/pocket assembly into the radio opening between the radio mounting brackets until it clips into the opening.
  • Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 8/5/20 INST99-6523...
  • Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. The World’s best kits. MetraOnline.com ® © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 8/5/20 INST99-6523...
  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO Sin radio o con radio de fábrica de DIN sencillo: 1. Usando las herramientas de remoción del radio 86-5618 saque el radio de fábrica del tablero. (Figura A) 2. Quite los (2) tornillos Phillips de abajo de la apertura del tablero.
  • Página 7: Ensamble Del Kit

    (Figura B) (Figura D) y el conector de la antena en el tablero. (Figura C) Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. 6. Deslice el ensamble de radio de mercado secundario/cavidad en la apertura del...
  • Página 8 Tenga el vehículo separado y listo para realizar los pasos de solución de problemas antes de ponerse en contacto con el soporte técnico de Metra / Axxess. EL CONOCIMIENTO ES PODER Mejore sus habilidades de instalación y ®...