Iberital IB7 Manual De Instalación Y Funcionamiento página 89

IBERITAL
(BLANK SPACE! " # $ % &...). On fi nding the desired character, press the OK button to confi rm and
move on to the following character. Continue the process until all the characters are done.
Once this procedure is completed, press the MENU button to move on to the following option:
On the display the name on Line 1 will either move about or remain static; with the UP/DOWN buttons, select "ENABLED"
or "DISABLED" and press the MENU button to move on to the following option:
The name appearing on Line 2 (lower) of the display can be programmed, with the cursor in position 1 (of the 16
characters on each line) and using the +/- keys to select the different letter or number (BLANK SPACE! " # $ % &...). On
fi nding the desired character, press the OK button to confi rm and move on to the following character. Continue the
process until all the characters are done.
Once this procedure is completed, press the MENU button to move on to the following option:
On the display the name on Line 2 will either move about or remain static; with the UP/DOWN buttons, select "ENABLED"
or "DISABLED" and press the MENU button to move on to the following option:
The display will show the "CRONO FUNCTION" for each group; use the UP/DOWN buttons to ENABLED or DISABLE
the function.
The feed time will appear each time we make a coffee; if it is DISABLED the selected option will appear on the display.
Once this procedure is completed, press the MENU button to move on to the following option:
The display will show the dose setting mode. If it is ENABLED, then the dose can be programmed for the various options
(1 espresso, 1 coffee, etc.); if it is DISABLED, the dose cannot be programmed and the dose entered prior to this selection
will remain.
Press the UP/DOWN buttons to ENABLE/DISABLE the dose setting mode.
Once this procedure is completed, press the MENU button to move on to the following option:
The display will show the "CONTINUOUS" (NON-STOP) programming mode. The CONTINUOUS dose will only
function if it is ENABLED.
Once this procedure is completed, press the MENU button to move on to the following option:
The display will show the "MIXED TEA" option, to select water for tea that is either hot water only "without pump" option
or hot water mixed with cold water "with pump" option.
88
Line rotation 1
ENABLED/DISABLED
Name 2
xxxxxx
Line rotation 2
ENABLED/DISABLED
Crono Function
ENABLED/DISABLED
Doses setting
ENABLED/DISABLED
Continuous key
ENABLED/DISABLED
Mixed tea
with pump / without pump
INSTALLATION AND OPERATION MANUAL