Boiler Temperature - Iberital IB7 Manual De Instalación Y Funcionamiento

Confi rm by pressing OK and immediately the display will show:
Press the UP/DOWN buttons to select the desired hysteresis (the variation in degrees for the temperature in the specifi c
boiler).
Confi rm by pressing OK key and immediately the display will show:
Press the UP/DOWN buttons to select the desired hysteresis (the variation in degrees for the temperature in the specifi c
boiler).
- If "PID" is selected, press the MENU button to confi rm, and the display will show:
With the UP/DOWN buttons, select the unit of measurement for temperature, in Celsius (ºC) or in Fahrenheit (ºF).
Confi rm by pressing OK and immediately the display will show:
Press the UP/DOWN buttons to select the desired boiler temperature, and confi rm the selection by pressing OK.
The visual display will show:
Using the UP/DOWN buttons, select the value for each constant and confi rm by pressing OK. (IT IS RECOMMENDED
THAT THOSE VALUES ESTABLISHED BY THE MANUFACTURER BE MAINTAINED.)
The visual display will show:
Initial regulation temperature for the algorithm for the three constants. (It could have a value of "2ºC / Up to 20ºC" or "3ºF
/ Up to 36ºF"). (IT IS RECOMMENDED THAT THOSE VALUES ESTABLISHED BY THE MANUFACTURER BE MAINTAINED.)
Press the UP/DOWN buttons to select the desired temperature, and confi rm by pressing OK.
Once this procedure is completed, press the MENU button to move on to the following option:
The display will show the 'WATER FILTER' option, to select the number of litres of water consumed before the WATER
FILTER CHANGE/REPLACEMENT ALARM activates. Press the UP/DOWN buttons to select the quantity of water in litres.
INSTALLATION AND OPERATION MANUAL
Histe. Temp.
xxxxxxx
xxxxxx: 0,5ºC | 1ºC | 2ºC
xxxxxx: 1ºF | 2ºF | 4ºF

Boiler Temperature

xxx ºC / xxxx ºF
ºC / ºF
Boiler Temperature
xxx ºC / xxxx ºF
KP KI KD
xxx xxx xxx
PID setting
Water filter
xxxxxxx
IBERITAL
91