Product Information - Steamfast SF-717 Guia Del Usuario

Product Information

8 9 10
7
6
5
4
3
2 1
FEATURES
1. Ironing Plate
2. Main Body
3. Heating Indicator Light
4. Power Cord Clip
5. Water Tank Cap
6. Water Tank Windows (2)
7. Steam Button
8. Temperature Control Dial
9. Hand Grip
10. Water Tank (internal)
11. Voltage Selector
12. Stands (2)
4 | ENGLISH
11
12
13
14
ACCESSORIES
13. Measuring Cup
14. Travel Bag
• The Ironing Plate is the heated, non-stick surface that is used to press fabrics,
remove wrinkles and create creases.
• The Main Body contains the unit's internal heating components.
• The Heating Indicator Light illuminates when the Temperature Control Dial is set to
one of the three heat settings. Refer to Page 8 for details.
• The Power Cord Clip holds the power cord securely when wrapped around the
base of the Hand Grip for storage. Refer to Page 9 for details.
• The Water Tank Cap covers the Water Tank fill hole. The Water Tank Cap is
tethered to the unit, and cannot be completely removed. Refer to Page 7 for
details.
• The Water Tank Windows let you monitor the level of water in the Water Tank.
The unit must be sitting upright to correctly read the water level.
• The Steam Button is pressed to activate the unit's steam function. Locking the
Steam Button down disables steam; pressing the Steam Button releases it into the
unlocked position, enabling steam. Refer to Page 8 for details.
• The Temperature Control Dial is turned to select one the three heat settings, and
to turn heating off. Refer to Page 8 for details.
• The Hand Grip is ergonomically designed for user comfort. The Hand Grip
contains the unit's Water Tank, and the base is specially designed for the power
cord to be wrapped around for storage.
• The Water Tank, located inside the Hand Grip, is designed to hold a maximum of
1.1 oz (32 ml.) water. Refer to Page 7 for details.
• The Voltage Selector is the recessed switch which is used to set the unit to either
100-127V or 220-240V electrical voltage standards. By default the Voltage
Selector is set to 100-127V. Refer to Page 6 for details.
• The Stands are the two supports located at the rear of the Main Body. The Stands
are designed to support the unit in an upright position when the Ironing Plate is
hot, to help prevent damage to surfaces.
• The Measuring Cup is designed to help you easily and consistently fill the Water
Tank with the optimum amount of water.
• The Travel Bag is designed to hold the unit and Measuring Cup for more
convenient packing and travel.
ENGLISH | 5