Jacuzzi BUILDER Serie Manual De Instalación Y Operación página 26

Controlling Whirlpool Action
The whirlpool action in your bath is influenced by three factors –
direction of flow, force of water, and force of air. All whirlpool baths
manufactured by Jacuzzi Whirlpool Bath are equipped with adjust-
able PowerPro ® jets, that may be adjustable for one or more of the
three factors.
Direction: To change the direction of the water flow, swivel the
jet nozzle to the desired angle. The jets can be directed individually
toward any location on your body to provide a hydromassage. The
jets can also be adjusted so that they all point in the same direction
(clockwise or counterclockwise) to circulate the water in a circular
motion around the bath, causing a total whirlpool effect.
Water Force: The high volume, fully adjustable jets can be ad-
justed to control the force of the water coming into the bath. For
robust action, increase the force of the flow by rotating the jet handles
to the left (counterclockwise). For a more gentle effect, rotate the
handles to the right (clockwise). Never run the whirlpool system
with all the jets closed.
Force of Air: Two knobs located on the bath serve as controls for
the air induction system. The intensity of the hydromassage whirl-
pool action is determined by the amount of air inducted into the water.
As the amount of air is increased, the hydromassage action increases.
For maximum air induction, rotate the control knobs fully counter-
clockwise to the largest circles. For fewer air bubbles, decrease the
amount of air induction by rotating the control knob clockwise. When
the knobs are turned to the smallest circles, only water is being circu-
lated.
Jacuzzi Whirlpool Bath© K272000AC 12/04
JETS
DIRECTIONALLY
ADJUSTABLE
AIR INDUCTION CONTROLS
TURN CLOCKWISE TO
REDUCE AIR FLOW
20
FULLY
ADJUSTABLE
TURN COUNTER-CLOCKWISE
TO INCREASE AIR FLOW