Kruger KGV9000 Manual De Instrucciones página 28

Please note: This manual is the complete list of all the accessories, some of which may not
have been included in the standard set of machine.
PREPARING FOR USE
Before using the machine, you need to perform some simple steps, which are listed below:
- Vacuum cleaner support (14): place it on the bottom of the machine, taking care to make it
pass between the machine itself and the axis of the wheels; then use the screwdriver and the
four screws to fix (27).
Vacuum cleaner (15): place it on the vacuum cleaner support (14). Connect the suction nozzle
-
by a slight pressure until you hear the "click" sound. Then connect the power cord to the
socket (21) on the back of the machine and press ON / OFF switch of the vacuum cleaner
located on the head of the vacuum cleaner itself.
- Push handle (16): insert the handle in its place at the back of the machine, then secure it by
tightening the four screws (20) you find in machine's packaging. On it you can place the
bucket (17) to hold accessories or other items.
- Tanks: the machine has three separate tanks, closed by a pressure cap; before starting
the machine it is necessary to fill them as follows:
Water tank (10): tank with a capacity of 8 liters, in which you must put water.
CAUTION: the filling into this tank of liquids different from water could compromise the correct
operation of the machine.
Detergent tank (8): tank with a capacity of 5 liters, in which you must put detergent mixed with
water, as specified on the product label.
CAUTION: use only detergent recommended by the manufacturer, so as not to cause damage to
the machine and the user.
Anti-limestone tank (9): tank with a capacity of 1 liter in which you must put undiluted anti-
limestone product. The product will be taken from the tank automatically, to be then mixed with
water in the pipes.
CAUTION: use only the anti-limestone product recommended by the manufacturer, so as not to
cause damage to the machine and the user.
Once the machine has been set, connect the main plug (23) to the outlet of a suitable facility (see
"Technical specifications"), then start the unit by turning the main switch (1) on the "I" position.
FIRST START UP
Once the machine is switched on, the electronics controls all the necessary levels (tanks and
boiler).
In the case the water tank is found to be empty, an alarm is shown on the display to tell the user
kruger.es 27