THOMSON MIC250IDABBT Manual De Instrucciones página 25

5. If no stations are found, please ensure the aerial is extended and test the reception by doing
another auto scan in a different location.
DRC (Dynamic Range Control)
The Dynamic Range Control (also known as DRC) is a technology used to help make quieter
sounds that are easier to hear in a noisy environment.
1. In DAB mode, press the
display "*" to the top right.
2. Press MENU to confirm the setting. The display will return to normal.
DRC OFF - DRC is switched off, broadcast DRC will be ignored.
DRC LOW - DRC level is set to 1/2 that sent by broadcaster.
DRC HIGH - DRC level is used as sent by broadcaster.
Prune (To Remove Stations That are Listed But Unavailable)
In DAB mode, press
select the Prune option.
System (DAB)
In DAB mode, press
to the system setting submenu.
1. Language
Press ENTER to go to language selection; the default source language is English; the selected
language will have "*" displayed at the top right.
Users may choose between "Deutsch", "Italiano" and "Français".
2. Factory Reset
Press ENTER to go to factory reset. If you wish to perform the reset operation, push
or until "YES" is highlighted on the display and press. A full reset of your radio will be
performed. All presets and station lists will be erased.
3. SW Version
Press ENTER to view the DAB software version. Press Menu or
to normal.
*If there are no operations after 30 seconds, the display will return to normal.
or button to select "DRC". Press the ENTER button to
or to display the "Prune" submenu. Press the ENTER button to
or to show the "SYSTEM" submenu. Press the ENTER button to go
- EN 8 -
. The display will return