Change Ear Pieces And Goggle Strap; Cleaning - dye INVISION i4 Manual Del Proprietário

whenever they are dirty or covered with paint. Please follow the lens cleaning instructions carefully to
preserve the life of your lens.
FOG RESISTANT SINGLE PANE LENS
Gently clean both sides of the lens with clear water and a cotton cloth. Dry the lens with a clean soft
cotton cloth. Do not excessively rub the inner lens surface, it will remove the fog resistant coating.
THERMAL DOUBLE PANE LENS
Gently clean the outside of the lens with clear water and a cotton cloth. Gently dry outside of the
lens with a clean cotton cloth. Dab the inner lens with a damp cotton cloth. Do not rub the inner lens
surface. The inner lens surface scratches very easily.
i4-Manual-Multi-Redux-FINAL-cs4.indd 9
in the forward position, rotate the gray retention clip
so that the upper guide tab moves back and out of the
frame.
3 Once both gray retention clips have been removed from
the frame remove the screw connecting the soft earpiece
to the retention clip.
4
To install new soft earpieces follow the removal instructions
in reverse.
Figure 13
The right and left gray retention clips are not the same.
The back of each clip is marked either "L" for left, or
"R" for right. Make sure that the Dye logo on the strap
faces up. When properly installed the top of the strap
attachment clip is flush with the goggle.

CLEANING

Figure 14
WARNING: Clean only with plain water. Chemical cleaners
(Windex
®
detergents which can weaken the lens and goggle.
Remove the lens from the goggle system for proper cleaning.
Clean your goggle immediately (same day) after each use or
W W W . D Y E P A I N T B A L L . C O M
[See Figure 13]
[See Figure 14]
, 409 , Simple Green , etc.) contain alcohol and
® ®
E
N
G
L
I
S
H
9
9/26/11 10:41 AM