Time Display
There are two different kinds of time
displays:
1. 12-hour display: the digital number
is from 11:59 to 12:00 with AM or
PM shown on the LCD
2. 24-hour display: the digital number
is from 00:00 to 23:59, no AM or
PM is shown on the LCD
3. To change from 12-hour display
to 24-hour display, or vice versa,
press CLOCK Button and hold it
till the LCD display changes. Press
CLOCK Button again to return to
original display.
Week & Time Setting
Week Setting
1. Press and hold the SET Button until
the week display flashes, which
indicates setting is ready
2. Press ▲+ Button to increase the
day, or ▼- Button to reduce the
day, the sequence of the display is
shown as follows:
Mo→Tu→We→Th→Fr→Sa→Su→
3. Press ▲+/▼-Button once will
increase or reduce the day by
sequence slowly. To press and
hold the button, the week display
moves quickly. Release the button
until your desired day of the week
shown on the display. Press SET
Button to confirm your setting.
www.grupotemper.com
KOBAMATIC DIGI
Plug-In Digital Timer
Time Setting
1. After setting the day of the week,
hour display flashes to indicate
setting time can be started
2. Press ▲+Button to increase
number of hour, or ▼- Button to
reduce.
3. Press ▲+/▼-Button once will
increase or reduce each hour
slowly. To press and hold the
button, the hour display moves
quickly. Release the button until
your desired hour shown on
the display. Press SET Button to
confirm your setting.
"Minute" display then flashes to
indicate setting minute is ready.
Repeat the same procedures in
setting hour as in 2 and 3 to set
minutes.
Summer Time Setting
1. Press CLOCK Button and ▼-
Button at the same time to change
to summer time, time display
automatically adds one hour and
"S" is shown on the LCD.
2. By pressing Clock Button and ▼-
Button again to cancel the summer
time setting.
NOTE:
LCD must be in real time display to
start week and time setting. If LCD
is in program setting display, press
Instructions manual |
13