Countdown Setting
1. When the LCD is in real time
display, press ▼- Button once
to change to countdown setting
display, "d ON (or OFF)" will be
shown on the lower left corner of
the LCD.
• "d": indicates the program is in
countdown mode.
• "ON": counting down the
power on time.
• "OFF": counting down the
power off time.
2. Press SET Button until the on/
off display flashes, setting the
countdown power on/off status is
ready.
3. Press ▲+/▼- Button to chose
countdown on/off program and
press SET Button to confirm.
4. Hour display flashes after setting
the on/off status then press
▲+/▼- Button to increase or
reduce hour and press SET Button
to confirm.
5. Minute display then flashes,
press ▲+/▼- Button to increase
or reduce minute and press SET
Button to confirm.
6. Second display flashes, press
▲+/▼- Button to increase or
reduce the hour display and press
SET Button to confirm. Setting
interval is from 99:59:59 to 1
second.
7. Connect the Timer to the AC
socket and set the Timer to AUTO
www.grupotemper.com
KOBAMATIC DIGI
Plug-In Digital Timer
status in order to start /stop the
countdown functions.
8. Press CD Button once to start the
countdown function, "d ON (or
OFF)" flashes in the lower corner
of the LCD to indicate countdown
is in progress. Press CD Button
again to stop the countdown
function.
NOTE:
• When countdown is in progress,
LCD is in real time display, press
▼- Button once to view the
countdown details.
• To change a preset program,
repeat the above procedures 2 to 6
and input the new data to replace
the old setting.
• After program setting, press
CLOCK Button to return to clock
display at once, or it will be
returned automatically after 15
seconds without pressing any
other buttons.
Random Setting
1. Random function turns on and off
the appliance irregularly:
• Minimum time for power off:
26 minutes
• Maximum time for power off: 42
minutes
• Minimum time for power on:
10 minutes
• Maximum time for power on:
26 minutes
Instructions manual |
15