Override/Resume Preset Program; Connections; Safety Precaution - koban KOBAMATIC DIGI Manual De Instrucciones

KOBAMATIC DIGI
Plug-In Digital Timer
2. Connect the Timer to the AC
socket and set the program to
AUTO status in order to start/stop
the random function.
3. Press RND Button once, "r OFF"
is flashing in the lower corner
of the LCD, random function is
activated. Power is off for 26 to 42
minutes. The mode will change to
"r ON", where power turns on
from 10 to 26 minutes. Then back
to "r OFF" again.
4. Press RND Button again can stop
the random function, "r OFF"or
"r ON" disappears from the LCD.
Override/Resume
Preset Program
Press ON/OFF Button each time can
override/resume the preset program,
LCD changes the display in the
following sequence:
1. ON: override the preset program
and appliance remains on at all
time.
2. AUTO: resume the preset program,
appliance will be turned on and
off automatically according to the
preset time.
3. OFF: override the preset program
and appliance remains off at all
time.
NOTE:
• The preset countdown or random
functions only activates when
the Timer is in AUTO status and
Instructions manual | 16
plugged into the AC socket.
• When countdown function is
activated, random and auto on/off
program setting will not active.
• When random function is
activated, countdown and auto on/
off program setting will not active.

Connections

• Preset your desired On/off
programs on the Timer as
mentioned above.
• Switch off your electrical appliance
• Connect your appliance's power
cord to the Timer's socket, then
connect the Timer to the AC socket
to get power
• Switch on your appliance.
• Appliance will then be turned
on/off according to your preset
programs unless manual override
pressed.

Safety Precaution

• Disconnect from the socket before
removing the battery cover.
• The Timer is using rechargeable
battery. When changing the
batteries, the preset program will
all be reset and need to input new
program afterwards.
• Risk of electric shock:
• Keep away from children
• Unplug timer before cleaning
and program setting
• Fully insert plug
www.grupotemper.com