Program Setting - koban KOBAMATIC DIGI Manual De Instrucciones

KOBAMATIC DIGI
Plug-In Digital Timer
CLOCK Button once to return to real
time display.

Program Setting

1. When the LCD is in real time
display, press ▲+ Button once to
change to program setting display,
"1ON" will be shown on the
lower left corner of the LCD:
• "1" iindicates the program
group's number (program
group is from 1 to 14).
• "ON" indicates power on time.
• "OFF" indicates power off time.
2. To chose the program group and
on/off status, press ▲+ Button
to increase the group number,
sequence as follows:
3. To reduce the program group
number, press –Button, LCD
displays in the following sequence:
4. After choosing the program group,
then can set the week and time.
Press SET Button until the week
display flashes, press ∧+ Button
each time, the LCD will display the
following in sequence:
• Mo Tu We Th Fr Sa Su
• Mo → Tu → We → Th → Fr → Sa → Su
• Mo We Fr
• Tu Th Sa
Instructions manual | 14
• Sa Su
• Mo Tu We
• Th Fr Sa
• Mo Tu We Th Fr
• Mo Tu We Th Fr Sa
5. By pressing the ▼–Button, the
week display will be shown in
the opposite direction as above
sequence.
6. Press ▲+/▼－Button once will
increase or reduce the week
display slowly. To press and hold
the button, the display moves
quickly. Release the button until
your desired week pattern shown
on the display. Press SET Button
to confirm, week display stops
flashing.
7. After set the day of the week,
the hour display flashes, repeat
procedures mentioned in Part Time
Setting to set time.
8. To set other program group's
on/off time, repeat procedures
mentioned from 2 to 7.
NOTE:
• To change a preset program,
repeat procedures 2 to 7 and input
the new data to replace the old
setting.
• After program setting, press
CLOCK Button to return to clock
display at once, or it will be
returned automatically after 15
seconds without pressing any
other buttons.
www.grupotemper.com