Dri-Eaz LGR 2800i Manual Para El Usuario

with integrated sensors and remote monitoring capability
Dri-Eaz® LGR 2800i reduces humidity in enclosed structural environments by removing
water vapor from the air. The LGR 2800i is engineered to be rugged, durable and highly port-
able, making it ideally suited for water damage restoration, structural drying, construction,
and other applications requiring temporary, high-performance dehumidification.
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
SAFETY INSTRUCTIONS
WARNING
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing. Unit must be grounded.
 Inspect the power cord before use. If cord is
damaged, do not use. Always grasp the plug (not
the cord) to unplug.
 Insert three-prong plug on power cord into a
matching electrically grounded outlet. Do not use
adapter. Never cut off third prong. Do not use an
extension cord.
 The unit must be operated on a 115V/60 Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
 Keep motor and wiring dry.
 Do not attempt to repair the unit. For Authorized
Service Centers, call Dri-Eaz at 800-932-3030.
BEFORE YOU BEGIN
Unpacking your unit
Retain all packing material and boxes for possible
equipment returns. Find and retain the AA batteries,
which must be installed before using the unit.
Installing the sensor batteries
Two AA batteries are shipped with LGR 2800i to provide
power to the built-in HygroTrac® wireless transmitter
07-01674B 2009-04
Owner's Manual
LGR 2800i Portable Dehumidifier (F410)
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950 www.dri-eaz.com
Patent Pending: 12,272,455
when the 2800i is not connected to AC power. The
battery compartment is located directly under the power
cord socket on the back of the unit (see Figure C). Use a
flat-blade screwdriver to turn the battery compartment
cover 90° counter-clockwise and remove the cover.
Insert the batteries with the negative terminal in first.
After inserting the batteries, secure the cover by
pressing it in with the screwdriver and turning it 90°
clockwise.
Warranty registration
Visit warranty.drieaz.com to register your purchase.
Registration allows us to better assist you with using,
maintaining or servicing your equipment, as well as to
contact you in case we have important safety information
concerning your Dri-Eaz product. If you determine
service is required, have your equipment model, serial
number and original proof of purchase available and call
your distributor for assistance with obtaining a return
material authorization (RMA).
CONTENTS GUIDE
Positioning a dehumidifier .......................... 2
Parts Identification ....................................... 3
Operating your dehumidifier ....................... 3
Maintenance.................................................. 5
Transport and storage ................................. 6
Cleaning ........................................................ 7
System status and data messages............. 8
Error messages ............................................ 8
Troubleshooting ........................................... 9
See "HygroTrac Remote Sensing" (p. 2) for an overview
of how to use the LGR 2800i with the HygroTrac Remote
Monitoring System (purchased separately).
INTRODUCTION
LGR 2800i dehumidifiers reduce humidity in enclosed
structural environments by removing water vapor from
1 Dri-Eaz Products, Inc.