Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT - KEEP THE FRONT GLASS ALWAYS CLEAN ALSO FROM OUTSIDE. DISCONNECT FROM MAIN
ELECTRICITY SUPPLY BEFORE CLEANING.
•
Never use an extension cable with this appliance.
•
The substitution of the cable must be carried out from specialist technician.
•
For any doubt please contact a qualified electrician.
•
ECOWRG/7 must be placed to a free distance (visual line) not inferior of 2 mt. from objects
like cardboard, woven, also stretch etc. Also if placed in workshops or garages where they are
present inflammable or combustible varnishes, ECOWRG/7 must be placed to distance not
inferior to mt. 4 from the danger source.
•
Attention, if installed ECOWRG/7 in proximity of stretches, to make attention that the
apparatus does not go in contact with the same ones.
4. INSTRUCTIONS FOR CHANGING LAMP
WARNING The guarantee does not cover replacement or repair of the bulb. To change the bulb, follow
the instructions given below in the order indicated (contact a professionally qualified electrician).
Disconnect the heater from the mains supply
1.
Ensure that the appliance is cold
2.
Remove the two cross-slotted screws and open the front glass panel
3.
Press one end of the bulb and remove it
4.
Insert the new bulb, repeating the operation in the opposite sequence, without touching it with bare
5.
hands
Close the front glass panel, ensuring that the seal fits properly.
6.
InfraCalor® 1300 watt are available from authorized dealers of this heater
7.
VARMA INFRARED IRK WATERPROOF is supplied with a InfraCalor® Bulb
12
Publicidad
