Appendix; Resetting Your Navus 2; Caring For Your Navus 2; Cleaning The Unit - Garmin Mopar Navus 2 Manual De Instrucciones

a
PPendIx
E
N

Resetting Your Navus 2

If your unit locks up (freezes up), press
and hold the
the unit. Then turn the unit back on. If
this does not help, reset your Navus 2.
To reset the Navus 2:
1. Place your thumb nail in the groove
under the top edge of the faceplate.
2. Gently pull off the faceplate.
Groove
Faceplate
3. Press the
4. Connect the Navus 2 to a power
source using the power cable. The
Navus 2 should automatically turn
back on and operate normally.
20
a
PPENdIx
Power
button to turn off
Power button
Reset button.
NoTe: If you need to reset your unit
often, update the system software.
See
updating the software.

Caring for Your Navus 2

Your Navus 2 contains sensitive
electronic components that can be
permanently damaged if exposed
to excessive shock or vibration. To
minimize the risk of damage to your
Navus 2, avoid dropping your unit and
operating it in high-shock and high-
vibration environments.
Reset
button

Cleaning the Unit

The Navus 2 is constructed of high-
quality materials and does not require
user maintenance other than cleaning.
Clean the unit's outer casing (not the
touch screen) using a cloth dampened
with a mild detergent solution, and
then wipe dry. Avoid chemical cleaners
and solvents that can damage plastic
components.
page 23 for information about
Navus 2 Owner's Manual