EGAmaster 56095 Manual De Instrucciones página 27

Note:
1. If appears, it means the wrench has been torqued to more than 110% of maximum
torque.
2. If appears, it means the wrench's memory is full and no more values can be
recorded. Please refer to the "Peak Hold Mode Recorded Value Review" section to clear the
momory records.
3. When max. operation torque has been reached, the alarm will change to a steady tone and
the green&red LED will illuminate.
M2 peak-hold mode:
Suitable for the bolts its length is unusual longer or needs an extension bar. Please follow the
following procedure to get the QC value:
PEAK HOLD MODE OPERATION
27