Grounding Instructions - Textron GREENLEE Ultra Tugger 6800-22 Manual De Operación

Grounding Instructions

Electric shock hazard:
Connect this tool to a grounded
receptacle on a 16-amp GFCI-
protected circuit.
Failure to observe these warnings can
result in severe injury or death.
This tool must be grounded. In the event of a malfunc-
tion or breakdown, an electrical ground provides a path
of least resistance for the electric current. This path of
least resistance is intended to reduce the risk of electric
shock to the operator.
This tool's electric cord has a grounding conductor and
a grounding plug as shown. Connect the plug to recep-
tacle that is properly installed and grounded in accor-
dance with all national and local codes and ordinances.
Do not use an adapter.
Greenlee / A Textron Company
6800-22 Ultra Tugger
8
Cable Puller and Pulling Package
®
16-Amp / 230-Volt Plug and Grounded Receptacle
Plug
This tool is equipped with a European-style electrical
plug. The electrical plug can be replaced with a compat-
ible plug for the country in which the tool will be used.
The electrical plug should be replaced by a qualified
electrician. Do not use an adapter.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Receptacle