Intended Use; State Of Charge Display - Hilti SID 4-­A22 Manual De Instrucciones Original

3 Description
3.1 Product overview
3.2

Intended use

The product described is a compact cordless impact screwdriver with hex bit holder for medium-heavy-duty
screwdriving in wood, metal and other materials.
The following applications are available:
• Driving self-drilling and self-tapping screws up to Ø 4.8 mm in steel
• Driving HUS screw anchors with 6 mm in masonry and concrete
• Driving Hilti HRD frame anchors Ø 8 mm to 10 mm
• Driving wood screws up to Ø 8 mm
• Drilling in wood with WDB-S spade drill bits
▶ Use only Hilti lithium­ion batteries of the B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3

State of charge display

The charge state of the Li­ion battery is displayed after pressing one of the two battery release buttons lightly
(press only until slight resistance is felt).
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
Battery charge state cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.
2145524
*2145524*
Printed: 18.05.2018 | Doc-Nr: PUB / 5293888 / 000 / 03
1
Chuck ( / " hex socket)
1
@
4
Light
;
Forward/reverse switch with safety lock
=
Control switch (with electronic speed control)
%
Grip
&
Torque indicator
(
Torque selector button
)
Belt hook (optional)
+
Battery
§
Battery state of charge indicator
/
Battery release button
:
Meaning
• Charge state: 75 % to 100 %
• Charge state: 50 % to 75 %
• Charge state: 25 % to 50 %
• Charge state: 10 % to 25 %
• Charge state: < 10 %
English 15