Switching Off; Care And Maintenance Of Cordless Tools - Hilti SID 4-­A22 Manual De Instrucciones Original

6.1 Setting the torque
▶ Push the torque selector button repeatedly until the desired torque setting is displayed in the torque
display.
6.2 Setting forward or reverse rotation
▶ Set the forward/reverse switch to the desired direction of rotation.
◁ The control switch is locked when the forward/reverse switch is in the middle position (safety lock).
An interlock prevents switching while the motor is running.
6.3 Switching on
▶ Press the control switch.
◁ Speed of rotation is regulated by the distance the control switch is pressed in.
6.4 Screwdriving
CAUTION
Risk of injury by damaged workpieces! Screws or workpiece can be damaged if torque is too high. This
presents a risk of injury.
▶ Make sure that screws and workpiece are suitable for the torque produced by the tool.
1. Move the forward/reverse switch into the middle position.
2. Use the torque selector button to set the desired torque. → page 18
3. Set the forward/reverse switch to the desired direction of rotation.
6.5

Switching off

▶ Release the control switch.
6.6 Removing the accessory tool
CAUTION
Risk of injury by the accessory tool! The accessory tool might be hot or have sharp edges.
▶ Wear protective gloves when using the power tool and when changing accessory tools.
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Pull the chuck ring forward and hold it in this position.
3. Pull the accessory tool out of the chuck.
4. Release the chuck ring.
7

Care and maintenance of cordless tools

WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance tasks!
Care and maintenance of the tool
• Carefully remove stubborn dirt from the tool.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these may attack the plastic parts.
Care of the Li­ion batteries
• Keep the battery free from oil and grease.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these may attack the plastic parts.
• Avoid ingress of moisture.
18 English
Printed: 18.05.2018 | Doc-Nr: PUB / 5293888 / 000 / 03
5
6
4
2145524
*2145524*