Preparing The Place Of Installation; Assembly Diagram; Safety Precautions - Palazzetti ECOPALEX T Glass Manual De Instalación, Uso Y Mantenimiento

5 PREPARING THE PLACE OF
INSTALLATION
5.1

ASSEMBLY DIAGRAM

(Fig. 5.1)
A) For proper installation, the smoke ducting between
B)
of 5 cm between cladding and combustion air intake
pipe.
C) UNI standards require the installation of a heat
recovery grille as close as possible to the ceiling.
D)
E)
aluminium foil
F)
G)
stove
H)
Fig. 5.1.1 In the product technical detail shows the
minimum distances in centimeters to be observed
materials and combustible objects.
Leave enough room for maintenance.
5.2

SAFETY PRECAUTIONS

The responsibility for any work done in the space where
the wood insert is to be installed is, and remains, the
user's. The user is also entrusted with carrying out the
checks regarding the proposed installation solutions.
Any wood beam of the cladding, or any finish in
combustible material, must be suitably insulated (or
located outside the area that is heated by the wood insert).
The user must comply with all the local, national and
European rules and regulations.
If the floor does not have a sufficient load-bearing
capacity, it is advisable to use a load-distributing plate
of an appropriate size.
adequate carrying capacity.
If the floor does not have a sufficient load-bearing
capacity, it is advisable to use a load-distributing plate
of an appropriate size.
The wood insert assembly and disassembly operations
must be carried out by skilled technicians only.
It is always advisable for the user to call our assistance
If other technicians are called in, please make sure they
Before starting the assembly or dismantling phases of
the wood insert, the installer must comply with the safety
precautions as established by law, and in particular :
1. he must not work in adverse conditions;
2. he must be in perfect psychophysical condition to
work and ensure that the individual and personal
accident prevention devices are sound and in perfect
B
MINIMUM DISTANCE FROM COMBUSTIBLE MATERIALS
Y2
X1
25
C
A
E
D
F
G
H
- 5.1 -
Z
X2
Y1
- 5.1.1 -