Use Of The Oven - Teka HPS-735 Guía De Uso

3172755-001 EPIFA 21/11/14 08:28 Página 23
Caution
The electronic clock features Touch-Control
technology. To operate, simply touch the glass
control symbols with your fingertip.
The touch control sensitivity continuously
adapts to ambient conditions. Make sure the
glass surface of the control panel is clean and
free of obstacles when plugging in the oven.
If the clock does not respond correctly when
you touch the glass, unplug the oven for a
few seconds and then plug it in again. Doing
this causes the sensors to adjust automati-
cally so that they will react once more to fin-
gertip control.
Setting the time on the Electronic Clock
When the oven is connected to the power sup-
ply, the indication 12:00 flash on the display.
Press or to set the time on the clock.
The clock beeps twice to confirm the selected
time.
If you wish to modify the time, press
until the current time flash on the screen.
Press . Then press
the time. The clock beeps twice to confirm the
modification.
Manual Operation
The oven is ready to be used when the clock
has been set. Select a cooking function and a
temperature.
When you begin cooking, symbol
up to indicate that the oven is heating the con-
tents; the symbol
selected temperature is reached.
Set the controls to
Functions of the Electronic Clock
Alarm: Creates an alarm signal when the peri-
od of time finishes; the oven does not need to
be in use in order to use this function.

Use of the Oven

or
or to modify
lights
goes out when the
to turn the oven off.
Cooking Time: To cook for a selected length
of time; the oven turns itself off automatically
when the time finishes.
End Cooking Time: To cook until a set time;
the oven turns itself off automatically when
the time finishes.
Cooking time and End Cooking Time: To cook
for a selected length of time and end at a set
time. When this function is set, the oven
comes on automatically at the time required in
order to cook for the set length of time
(Cooking time) and end automatically at the
indicated time (End Cooking Time)
Child Safety Function. This function locks the
electronic clock, preventing small children
from playing with it.
Programming the Pyrolytic function
Programming the Alarm
1 Press until symbol
.
2 Set the period of time after which you wish
the alarm to sound by pressing
3 The clock beeps twice and symbol
lights up permanently to indicate that the
alarm has been set.
4 When the set period of time comes to an
end, the alarm sounds and symbol
starts to flash.
5 Press any button to stop the alarm; symbol
goes out.
You can consult the remaining time at any
moment by pressing
flashes and then pressing
can also modify the set time at this point by
pressing or . The clock beeps twice to
confirm the change.
Setting the Cooking Time
1 Press or until symbol
Press .
lights up. Press
or .
or until symbol
. You
lights up.
23