Setting The Flash; Taking A Video Clip - CONCORD Eye Q 3042 AF Guia De Inicio Rapido

GETTING STARTED / TICKING PICTURES

SETTING THE FLASH

3
M
A
AWB
1. Press repeatedly until the desired indicator appears on the LCD.

TAKING A VIDEO CLIP

003/016
AWB
To record a video clip:
1. Slide the Mode Switch to (
2. Position the subject in the viewfinder or LCD.
3. Press the shutter button fully to capture a continuous video clip.
4. To stop recording, press the shutter button again.
Note: There is a time limit for each video clip. The time will vary depending on the amount of available
memory space. The alloted amount of recording time will appear on the top right hand corner of the
screen. The video clip capture will stop automatically when it reaches its time limit.
Video Clip Information
Resoluton: 512 x 384
Frame rate: 10fps
File Format: AVI (Motion Picture)
Note: The Flash Ready LED will turn red when the camera is storing the video clip. Do not open the
battery door or turn the camera off while recording, or the video clip may not be stored.
003/016
AWB
003/016
Press Shutter to Record
) Video Clip Mode.
A
003/016
003/016
AWB
28 SEC
A
AWB
5
3
M
28 SEC
003/016
AWB
28 SEC
A
AWB
A
AWB
28 S
A
AWB
A
AWB