Noise Data; Noise Declaration Statement - CP PAC P 13 Instrucciones De Seguridad Y Manual De Instrucciones

PAC P 13

Noise data

Total emitted A-weighted sound power level
Measured
L
WAm
Model dB re 1 pW
PAC P 13 100
Sound power level:
In accordance with Directive 2000/14/EC.
The measured sound power level is based on max. rpm = 2850, pressure = 110 bar (1600 psi) and flow = 28
l.p.m. (7 US gal/min).
Sound pressure level:
In accordance with EN/ISO 11203.

Noise declaration statement

Guaranteed sound power level in accordance with directive 2000/14/EC.
Sound pressure level in accordance with EN/ISO 11203.
Please see table "Noise data".
These declared values were obtained by laboratory type testing in accordance with the stated directive
or standards and are suitable for comparison with the declared values of other tools tested in accordance
with the same directive or standards. These declared values are not adequate for use in risk assessments,
and values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material
the machine is used, as well as upon the exposure time and the physical condition of the user, and the
condition of the machine.
We, Chicago Pneumatic, cannot be held liable for the consequences of using the declared values, instead of
values reflecting the actual exposure, in an individual risk assessment in a work place situation over which
we have no control.
339 5183 81
Declared guaranteed
L L
WAd WAg
dB re 1 pW dB re 1 pW
101 101
Safety and operating instructions
K value
dB
1.6
Sound pressure
level
1 m L
PA
dB re 0 µPa
89
1