Memorising / Deleting Remote Controls; Adjusting The Parameters - entrematic Ditec TOP603H Manuale Tecnico

16. Memorising / Deleting remote controls

16.1 Memorising remote controls via the control panel
1. Press the [7] and [5] keys simultaneously for about 1 s. The display flashes
2. Press the required key on the remote control.
• The display indicates
• The function of the memorised key is OPEN-STOP-CLOSE-STOP.
NB: with automatic closure enabled (parameter b4), the function of the remote control is OPENING.
16.2 Memorising remote controls from a distance
1. Press the PRG of a previously memorised GOL4 transmitter for 5 seconds
(within the range of the receiver) until the LED lights up.
2. Press any one of the CH keys of the new transmitter.
• The new transmitter can memorise the same keys as the existing trans-
mitter.
NB: be careful not to accidentally memorise your neighbours' transmitters.
16.3 Deleting remote controls
1. Press the [7] and [5] buttons simultaneously for more than 6 seconds. The display flashes
, first slowly and then more quickly.
•
All the remote controls are deleted.

17. Adjusting the parameters

1. Press the menu button
or to the last parameter adjusted. The 2-character menu name flashes. For example A ... 0.
2. Select the required parameter using the [7] and/or [5] buttons.
3. Press the menu button
parameter. For example, 0.
4. Alter the value using the [7] and/or [5] buttons. The new value is automatically memorised.
5. Press the [6] button for less than 1.5 s. The display returns to the selected parameter.
• To quit the adjustment mode, press the
• The adjustment mode is automatically quit after 15 s of inactivity.
NB: while the adjustment mode is active, the automation cannot accept any commands.
WARNING: if the programming menu values from A0 to A4 are modified, the display visualises
L .. 4 and you must repeat the learning procedure (see chapter 15).
for about 1 s, and the remote control is memorised.
[6] for more than 1.5 s. The display goes to the adjustments menu
[6] for less than 1.5 s. The display indicates the value of the selected
[6] button for more than 1.5 s.
77
.
PRG