Bpt FUTURA IP Manual De Instrucciones página 47

Futura IP
SETTINGS
LOG-IN MODE MODALITÀ LOGIN
UTENTE USER
INSTALLATORE INSTALLER
PASSWORD PASSWORD
•••••• ••••••
Language Lingua
System Info
MODEL
Date and Time
Network
SN
SIP
Voicemail
HW VERSION
Maintenance
SW VERSION
Diagnostics
ACCOUNT STATUS
Not available
System Info
MAC ADDRESS
Date and Time
Network
MODE
SIP
Static
Voicemail
IP ADDRESS
Maintenance
NETMASK
Diagnostics
GATEWAY
Enter Entra
System Info
Help Exit
Network
Help Exit
DEVICE SETTINGS VIA WEB INTERFACE
Access to web interface
To access the settings web pages, enter the IP address of the device you
want to configure into the address bar of your browser (Chrome, Firefox,
Safari). The device's address can be found in the "Network" section of
the "Settings" menu (page 15).
Select the "USER" access option and enter the password, by default
"123456", to access the settings windows.
Warning:
The modification of some sections of the following menu requires
the intervention of a qualified technician. To have access to all the
settings options you must access with the "Installer" credentials
(default password 112233).
Note: There is no scroll bar on the right on the settings web pages.
To scroll through the web pages, press and hold down the right-hand
mouse button and drag. On a smartphone or tablet drag your finger
across the screen:
System Info
This window gives technical information that is useful for identifying the
device's characteristics, the hardware and software version, and the SIP
account status.
Date and Time
This window lets you set the date, time and time zone of the device
intuitively and easily.
Network
(possible modifications by accessing with installer
password)
MAC ADDRESS: The Mac address of the device cannot be changed
MODE: Lets you choose the type of address from:
DHCP: The IP address of the device is assigned by the DHCP server.
Static: The IP address of the device is manually assigned
IP ADDRESS: If you have chosen to use a static IP, enter the device's
IP address in this space. The address must belong to the same subnet
as the router and the other devices connected; the default address is
"192.168.1.4".
NETMASK: Indicate the subnet mask (if different from the default setting).
GATEWAY: Should it be necessary to route data traffic towards other
subnets, you can indicate a gateway in the relevant space.
To save the changes made or reload the previous data, press the relevant
button that will appear at the bottom of the page.