Fanaway LED EVO1 Manual De Instrucciones página 8

Fanaway LED EVO1 Installation Instructions
PREPARE AND COMPLETE THE ELECTRICAL WIRING --- WIRING DIAGRAM (FIG. 9)
WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A LICENSED
ELECTRICIAN.
NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED WIRING.
USE WITH WALL SWITCH WIRING DIAGRAM:
Fig. 9
Wiring requirement at the terminal block:

The switched active wire out from the rotary switch speed control "F" to the "L" terminal of the terminal block on the
mounting bracket.

The switched active wire out from wall controller "light" switch, to the "LA" terminal of the terminal block on the
mounting bracket.

Supply Neutral to "N" terminal of the terminal block on the mounting bracket.

Earth to " " terminal of the terminal block on the mounting bracket.
7 | P a g e
ELECTRICAL WIRING DIRAGRAM
V e r 1 . 0