Kwik Tek Sportstuff 58-1015 Manual De Uso página 3

6. Once trampoline assembly is complete, it may be carried to a location near the water for
anchor assembly. This may take several people to lift and carry the product. Do not attempt to lift
this product by yourself. Do not drag across any land surface.
7. To attach the anchor assembly to the trampoline, you need to first turn the trampoline over so
that the bottom of the unit is accessible. Once turned over, attach the ends of two of the supplied
lengths of rope to opposite underside grommets so that they extend from one side of the trampo-
line to the other, crossing in the middle, forming an 'X' or '+'. Tie one end of the third supplied
rope around the intersection of the other two ropes. Lace the other end of the third rope through
the holes in the top of the anchor bag and tie a knot at the end so the bag does not come off.
Once completed, the anchor bag will hang freely from the bottom of the trampoline as shown in
figure 1A.
8. Utilizing the anchor feature will reduce drifting and unwanted motion of the product. This
product may be anchored by filling the attached anchor sack with sand, rocks, or a weight of up
to 25lbs. Place the anchor on top of the trampoline until product is in the water at the desired
location.
9. The product may be floated or pulled out to the location of your choice where it can remain for
use.
10. If pulled to location, there should be no one on the product until towing has stopped and the
item is anchored. Do not exceed 5 mph when pulling to location.
11. Once the product is in the desired location, drop the anchor bag in the water.
12. Have fun!
FIGURE 1A:
BOTTOM VIEW
TRAMPOLINE
SIDE VIEW
GROMMET
CONNECTION
ROPE
INTERSECTION
ANCHOR BAG