Mounting Considerations - Rockwell Automation Allen-Bradley PowerFlex 40 Guida Rapida

English-2

Mounting Considerations

• Mount the drive upright on a flat, vertical and level surface.
Frame
B
C
B (IP66,
Type 4X)
• Protect the cooling fan by avoiding dust or metallic particles.
• Do not expose to a corrosive atmosphere.
• Protect from moisture and direct sunlight.
Minimum Mounting Clearances
See Page 21 for mounting dimensions.
Mounting Option A
No clearance required
between drives.
Ambient Operating Temperatures
Ambient Temperature
Minimum
-10°C (14°F)
(1)
Rating requires installation of the PowerFlex 40 IP 30, NEMA/UL Type 1 option kit.
Screw Size Screw Torque
M4 (#8-32) 1.56-1.96 N-m (14-17 lb.-in.)
M5 (#10-24) 2.45-2.94 N-m (22-26 lb.-in.)
M6 (#12-24) 3.95-4.75 N-m (35-42 lb.-in.)
120 mm
(4.7 in.)
Closest object that
may restrict air flow
through the drive heat
sink and chassis
120 mm
(4.7 in.)
Enclosure Rating
Maximum
IP20, NEMA/UL Type Open Use Mounting Option A
40°C (104°F) IP66, NEMA/UL Type 4X
IP30, NEMA/UL Type 1
50°C (122°F) IP20, NEMA/UL Type Open Use Mounting Option B
DIN Rail
35 mm
–
–
120 mm
(4.7 in.)
25 mm
(1.0 in.)
120 mm
(4.7 in.)
Mounting Option B
Minimum Mounting
Clearances
Use Mounting Option A
(1)
Use Mounting Option B