auna Intelligence Amp Manual Del Usuario página 21

EN
11. ECHO control
Turn the knob to adjust the echo effect of the microphone.
12. On/Off switch
13. WIFI/BT antenna
14. AUX1 / AUX2 inputs
Allows you to connect most high-quality audio sources such as CD/DVD
players, tape decks, tuners, camcorders, video recorders, etc.
15 REC (RCA output)
Allows the amplifier to be connected to a recording device or another
amplifier.
16. Subwoofer output
17. Loudspeaker connection
Allows easy connection of speaker cables directly to the amplifier. The
impedance of the speaker can be between 4 and 8 ohms. The total
loudspeaker impedance must be at least 4 ohms per channel in stereo
mode.
18. LAN input port
LAN interface input by the router
19. AC IN mains plug connection
Connect the mains cable to a 220V / 50 Hz socket.
20. Replaceable mains fuse
The amplifier uses a fuse to protect against overvoltages and short circuits.
If the amplifier suddenly turns off and does not turn on again, check the
fuse and replace it with a new fuse (1 A / 250 V / 5x20 mm) if necessary. A
replacement fuse is NOT included in the scope of delivery!
21