User Preferences; 10I. Flight Mode; 10Ii. Display Pressure; 10Iii. Altitude Adjustment - Fisher&Paykel ICON Manual De Uso Y Cuidado

10
10i
10ii
10iii
10iv

10. User Preferences

• Turn the SmartDial to the User Preferences setting and press to enter.
10i. Flight Mode
Flight Mode allows for the device to operate on a reduced power (75 W).
Situations for use in this mode might include long-haul air flights and
camping.
NOTE: Humidity output will be significantly reduced in this mode and is not
recommended for long-term use.
• Turn the SmartDial to the Flight Mode setting
Turn to select On or Off and press again to accept the change.
• The Flight Mode symbol
Screen while the Flight Mode is activated.
NOTE: If you are intending to use your CPAP during flight, confirm with
your airline for F&P ICON approval prior to travel.

10ii. Display Pressure

The Display Pressure setting provides two display options for the Home
Screen. Time is the default setting, however this can be changed to show
pressure (cmH O or hPa) if required.
2
• Turn the SmartDial to the Display Pressure setting
to enter. Turn to select On or Off and press again to accept the
change.
• If a different unit of measure is required, press the SmartDial and hold
for 3 seconds. Turn the SmartDial to select either cmH
press again to accept the change.
10iii. Altitude Adjustment
• For models without automatic Altitude Adjustment, turn the SmartDial
to the Altitude setting
select the Altitude level from 0 to 9,000 ft and press to accept the
change.
• To choose meters, press the SmartDial and hold for 3 seconds while at
the Altitude Adjustment setting. When the symbol starts to flash, turn
to select meters and press to accept the change. Press the SmartDial
again to enter the menu and turn to adjust to the desired Altitude level.
Press again to accept the change.

10iv. Error Code

If the Error symbol
to the User Preferences setting and press to enter. Turn the SmartDial
again to access the Error Code
contact your healthcare provider.
NOTE: Settings will not change when the device is turned off.
A - 7
will be displayed continuously on the Home
and press to enter. Turn the SmartDial to
flashes on the Home Screen, turn the SmartDial
. Record the number displayed and
and press to enter.
and press
O or hPa and
2