Publicidad
Idiomas disponibles
Idiomas disponibles
1. ASSEMBLY INSTRUCTIONS.-
The assistance of a second person
is advisable for the assembly work.
Take the unit out of its box and make
sure that all of the pieces are there
Fig.1: (2) Monitor with handlebar; (12)
Handlebar stem; (20) Stabiliser bar
with wheels; (30) Stabiliser bar with
adjustable
blocks;
Saddle post covers; (33) Saddle; (40)
Main
body;
adjustment knob; (43L) Left pedal;
(43R)
Right
transformer; Bag of screws containing:
(104) Self tapping screw ST4.0x14;
(105) Flatwashers M4x16; Double
ended spanner; Box spanner with
screwdriver; Allen key 6mm.
2. FITTING THE STABILISER
BARS.-
Rest the main body on a wad of
packaging, as shown in Fig.2 (this will
help with the assembly work). Take
hold of the front stabiliser bar fitted
with wheels (20).
Remove the bolts (26) and their nuts
and washers. Now line up the two red
dots, as shown in Fig.2, and refit the
bolts (26), nuts and washers. Tighten
securely. Next, take the finish trim
piece for stabiliser (25) and rest it on
the stabiliser bar with wheels (20) that
you have just assembled. Attach the
trim to the bottom using the plastic
threaded
screws
washers (105).
Next, rest the main body on a wad of
packaging
material
assembly easier).
stabiliser with adjustable feet (30) and
position it on the machine's rear stand
Fig.3, insert the bolts (26) with the flat
washers and nuts, tighten securely.
(25)
and
(41)
Saddle
pedal;
(106)
(104)
and
(this
Take the
Then take the finish trim piece for
stabiliser (31) and rest it on the
stabiliser bar with wheels (30) that you
have just assembled. Attach the trim
to
the
threaded
washers (105), Fig.3.
3. ATTACHING THE PEDALS.-
(31)
The assembly instructions for the pedals
must be followed to the letter, fitting
height
these incorrectly could damage the
screw thread on the pedal or the crank.
Mains
Right and left refer to the position that
the user adopts when sitting on the
saddle to do the exercises.
The right-hand pedal (43R), marked
with the letter (R), screws onto the
right-hand crank, also marked with an
(R), in a clockwise direction. Tighten
securely, Fig.4.
The left-hand pedal (43L), marked
with the letter (L), screws onto the left-
hand crank, also marked with an (L),
in an anti-clockwise direction. Tighten
securely Fig.4.
4. FITTING THE HANDLEBAR
STEM.-
Mod. H8705.
Connect the two terminals (15 and 42)
Fig.5, coming out of the handlebar
stem (12) and the main body (40).
Insert the handlebar stem (12) onto
the boss on the main body (40) taking
care not to pinch the cables.
flat
Fit the bolts (13) and flat washers, as
shown in Fig.5, align the handlebar
stem and hand tighten.
makes
rear
15
bottom
using
screws
(104)
the
plastic
and
flat
Publicidad
